Compaq ProLiant 5500 - Chapter 7 Cabling for Wide-Ultra SCSI-3; Proliant 5500 and 5500 R Wide-Ultra SCSI-3 Cables and Connectors; Proliant 5500 and 5500 R Cables Shipped with Server

7-1
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: H-CH07.DOC Last Saved On: 2/8/99 11:06 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Chapter 7
Cabling for Wide-Ultra SCSI-3
ProLiant 5500 and 5500R
Wide-Ultra SCSI-3 Cables
and Connectors
The following information provides the user with a description of the ProLiant
5500 and 5500R server cables, drive cage option cables and SCSI connectors.
Information is included for cabling the simplex drive cage and the optional
duplex drive cage. Additionally, reference information is presented for
connecting serial ports, parallel ports, mouse, monitor, and keyboard.
ProLiant 5500 and 5500R
Cables Shipped with Server
The ProLiant 5500 and 5500R server is shipped with the following items:
■ One 19-inch, point-to-point non-terminated SCSI cable
(part number 199606-007)
■ One 22-inch, 3-device cable terminated SCSI cable to removable media
bays (part number 199616-010)
■ One 18-inch IDE cable (part number 243026-004)