A-7
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: J-APPA.DOC Last Saved On: 2/8/99 11:10 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compliance with International Regulations
All Compaq systems equipped with laser devices comply with appropriate
safety standards including IEC 825.
Laser Product Label
The following label or equivalent is located on the surface of the Compaq
supplied laser device.
This label indicates that the product is
classified as a CLASS 1 LASER
PRODUCT. This label appears on a
laser device installed in your product.
Laser Information
Laser Type Semiconductor GaAIAs
Wave Length 780 nm +/- 35 nm
Divergence Angle 53.5 degrees +/- 0.5 degrees
Output Power Less than 0.2 mW or 10,869 W·m-2 sr-1
Polarization Circular 0.25
Numerical Aperture 0.45 inches +/- 0.04 inches
To Next Page
Loading...
