5-5
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: F-CH05.DOC Last Saved On: 2/5/99 3:17 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Diagnostics and Other Utilities
■ When you select the Diagnostics and Utilities feature from the System
Configuration Utility main menu, the utility provides prompts to test,
inspect, upgrade, and diagnose the server.
■ Diagnostics and Utilities can be installed on the system partition on the
hard drive. Use SmartStart and Support Software CD to install.
■ Run the Inspect Utility once the computer has been configured to get
information about the operating system environment.
For instructions on using the Diagnostics Utility and other Compaq utilities,
refer to the Compaq Systems Reference Library CD.
To Next Page
Loading...
