5-4
Server Configuration and Utilities
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: F-CH05.DOC Last Saved On: 2/5/99 3:17 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
First, the utility prompts you to select the correct operating system. Use the
arrow keys to select the operating system and press the Enter key. The utility
then prompts you for the operating system CD or diskette.
Not all operating systems ship with each server. Consult your local reseller or
Compaq Customer Service to get a SmartStart pack with additional operating
system support. Some operating systems have driver support/updates but not an
integrated SmartStart installation. You can still configure your server and
manually install your operating system.
SMP Operating System Support
Compaq provides optimized software support for the Dual Processing Boards
for:
■ Microsoft Windows NT 3.51 and 4.0
■ intraNetWare SMP
■ SCO OpenServer 5.04 and 5.05
■ UnixWare 2.12 and 2.13
Loading Compaq Device Drivers
Drivers are located on the Support Software Diskette and on the Compaq
SmartStart CD. The drivers on the Support Software Diskette may be newer
versions with new functionality and upgraded utilities.
IMPORTANT: Always check
READ ME
files on SmartStart or any Software
Support Diskettes or CDs. If present, these files may contain information
about important software updates.
To Next Page
Loading...
