2-2
Installation Overview
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: C-CH02.DOC Last Saved On: 2/12/99 12:16 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Server Warnings and Precautions
WARNING: To reduce the risk of personal injury from hot
surfaces, allow the hot plug drives and internal system
components to cool before touching.
WARNING: To reduce the risk of electric shock or damage to
the equipment:
■
Do not disable the power cord grounding plug. The
grounding plug is an important safety feature.
■
Plug the power cord into a grounded electrical outlet that is
easily accessible at all times.
■
Install the power supply before connecting the power cord to
the power supply.
■
Unplug the power cord before removing the power supply
from the server.
■
If the system has multiple power supplies, disconnect power
from the system by unplugging all power cords from the
power supplies
CAUTION: Protect the server from power fluctuations and
temporary interruptions with a regulating uninterruptible power
supply (UPS). This device protects the hardware from damage
caused by power surges and voltage spikes and keeps the
system in operation during a power failure.
CAUTION: The Compaq ProLiant server
must always be
operated with the system unit cover on. Proper cooling will not be
achieved if the system unit cover is removed.
To Next Page
Loading...
