Compaq ProLiant 5500 - Page 106

6-20
Integrated Management Display
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: G-CH06.DOC Last Saved On: 2/8/99 11:27 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Event Messages
Continued
Event Type Event Message
EISA Bus
EISA Expansion Bus Master Timeout
(Slot X)
EISA Expansion Bus Slave Timeout
EISA Expansion Board Error (Slot X)
EISA Expansion Bus Arbitration Error
PCI Bus Error
PCI Bus Error (Slot X, Bus X, Device X,
Function X)
POST Error
POST Error: Error message
Power Subsystem
Power Supply Failure
Power Supply Inserted
Power Supply Removed
Power Supply Not Redundant
System Configuration
Battery Low
Power Module Failure
Power Modules Not Redundant
AC Voltage Problem
Power AC Overload
System Power Supply Failure (Power
Supply X)
System Power Supply Inserted (Power
Supply X)
System Power Supply Removed (Power
Supply X)
System Power Supplies Not Redundant
Real-Time Clock Battery Failing
A CPU Power Module (System Board,
Socket X)
A CPU Power Module (Slot X, Socket X)
System Power Modules Not Redundant
System AC Power Problem
(Power Supply X)
System AC Power Overload (Power
Supply X)
Continued