Index-1
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: M-INDEX.DOC Last Saved On: 2/8/99 11:54 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Index
A
About This Guide ix
Accessing
DIMM sockets on Memory board
4-9
memory board 4-2
processors 4-2
system board 4-2
Administrator Information 6-7
Arrow keys, IMD 6-10
ASR-2 1-8
Assembly 4-1
Automatic Server Recovery-2 See
ASR-2
B
banks, memory 1-2
battery recycling or disposal A-9
battery replacement notice A-9
battery replacement warnings A-9
boot
default configuration 5-1
System Configuration Utility
5-1
Bootblock Date field 6-9
Bracket rail
using in rack rail assembly 3-9
bracket, cable management arm 3-21
Buttons, IMD 6-10
C
Cable management arm
attaching to bracket 3-25
bracket for 3-21
cables
connectors 7-3, 8-3
determining needs 7-6, 8-6
regulatory compliance notice
A-3
SCSI examples 7-13
for simplex drive cage 7-13,
7-27
shipped with cable kit 7-2, 8-2
shipped with server 7-1, 8-1
usage matrix 7-10
Wide Ultra2 SCSI 8-1
Cabling
examples 8-9
Wide Ultra for removable media
8-9
Cage nuts for rack model server 3-16
Canadian Notice (Avis Canadien)
A-4
CDRH regulatory compliance notice
A-6
CD-ROM 7-6, 8-6
CD-ROM drive 1-3, 5-2
CDs
Compaq Management 5-2
CE Marking A-4
Channels
SCSI Input 0 7-9
Check mark, IMD 6-10
Class A equipment A-2
Class B equipment A-2
Compaq Insight Manager See Insight
Manager
Compaq Management CD 5-2
Compaq Series number A-1
Compaq System Configuration utility
installing 5-1
Compaq Systems Reference Library
CD See SRL
Compaq Web Site xiii
To Next Page
Loading...
