ndex-6
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: M-INDEX.DOC Last Saved On: 2/8/99 11:54 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
SCSI Hardware Device
connecting 8-12
Security features 1-9
Selector arrow, IMD 6-11
Server
Health Logs 1-6
management and configuration
1-6
rack mounting bracket 3-8, 3-9
rack slide rail assembly 3-9
Server bracket
attaching to server 3-21
Server Name 6-6
Server rail
using in rack rail assembly 3-10
server rail, attaching 3-20
Server Setup and Management pack
5-2
Service Information 6-8
Setup using System Configuration
Utility 6-4
Shutting down power 4-3
simplex mode 7-8, 7-9
Slide rail assembly 3-9
Slots
expansion 1-2
SmartStart 1-6
starting from System
Configuration Utility 2-6
SmartStart and Support Software CD
5-1, 5-2
SMP operating system support 5-4
Spinning bar, IMD 6-10
SRL
how to use ix
standard configuration, SCSI drives
7-13
Standard Integrated Management
Display Fields 6-9
Storage devices 1-2
Switches
switch and jumper settings 5-3
Symbols
IMD 6-11
in text xi
on equipment xi
Symbols in Text xi
System
board, accessing 4-2
management features 1-5
System Behavior with Error Events
6-12
System Configuration Utility 5-1
default configuration 5-1
general 5-3
starting SmartStart from 2-6
system partition 5-1
T
Taiwanese Notice A-6
tape drive 7-6, 8-6
technotes ix
Telephone Numbers xiii
temperature requirements
recommendations for rack-
mounted models 2-4
Template
Measuring with for rack position
3-14
Template, rack server 3-14
Terminator boards
removing for processor
installation 4-5
TEST Utility 5-3
Text Conventions x
To Next Page
Loading...
