vi
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: A-FRNT.DOC Last Saved On: 2/8/99 11:33 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Integrated Management Display
continued
Navigating the Menus ............................................................................................................. 6-10
Normal Run-time Behavior..............................................................................................6-10
Navigation Buttons ..........................................................................................................6-10
Display Symbols .............................................................................................................. 6-11
System Behavior with Error Events.................................................................................6-12
Menu Structure................................................................................................................. 6-13
Integrated Management Log ...................................................................................................6-14
Multiple Ways of Viewing the Log ................................................................................. 6-15
List of Events ...................................................................................................................6-18
Chapter 7
Cabling for Wide-Ultra SCSI-3
ProLiant 5500 and 5500R Wide-Ultra SCSI-3 Cables and Connectors ................................... 7-1
ProLiant 5500 and 5500R Cables Shipped with Server ....................................................7-1
ProLiant 5500 and 5500R Server Cable Kit Contents......................................................7-2
SCSI Cable Connectors......................................................................................................7-3
External Cabling........................................................................................................................7-5
Determining Cabling Needs...................................................................................................... 7-6
IDE Controller....................................................................................................................7-6
Integrated SCSI Controller........................................................................................................7-7
Standard SCSI Simplex Configuration..............................................................................7-8
Simplex Board Connectors ................................................................................................7-8
Examples .................................................................................................................................7-13
Example 1: Standard Configuration - Using Integrated SCSI Port 1 for Hard Drives,
SCSI Port 2 for Removable Media Bay...........................................................................7-13
Example 2: Using One Optional SMART-2 Controller for Hard Drives,
Integrated SCSI Port 1 for Removable Media Bay..........................................................7-15
Optional SCSI Duplex Configuration.....................................................................................7-18
Duplex SCSI Channels.....................................................................................................7-18
Example...................................................................................................................................7-27
Example 1: Using Integrated SCSI Port 1 and Port 2 for Hard Drives with
SCSI Input 1 Connected to the Removable Media Bay................................................... 7-27
To Next Page
Loading...
