Compaq ProLiant 5500 - Page 89

6-3
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: G-CH06.DOC Last Saved On: 2/8/99 11:27 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
2
1
2
2
2
Figure 6-2. Installing the Integrated Management Display
4. Connect Integrated Management Display cable to the peripheral board.
5. Restore server to normal operation.