2022_05 SAM_EN | 01 25
Information screens
In certain situations, information screens are displayed if technical problems occur during a charging process.
The following information screens are displayed if either a power failure or the communication between the SAM
and the control unit was interrupted during a charging process. Then the word "Invalid" is shown in the display
under Duration.
Figure 19: Duration: Invalid, during a charging process (example)
Likewise, in the summary (at the end of the charging process), the word "Invalid" is shown in the display under
Duration.
Figure 20: Duration: Invalid, in the summary after a charging process (example)
Billing by time not possible!
If the duration is declared invalid, then the time measurement cannot be billed.
To Next Page