Controlotron 1010PVN - How to Delete a Site Setup; How to Save;Rename a Site Setup

2-5
1010PVNFM-3A
Section 2
To scroll the option list to [On] press then . [Enter Code?] appears at the
top of the display screen.
To select the first character, use the numeric keys or press . To move the cursor
to the first character position .
To move the cursor to the second character position press .
Repeat the selection process for the second character. Continue this process until all
the required characters (8 max.) appear in the field.
To store code press . [Confirm Code ?] appears at top of the Display screen. Re-type
code exactly as described above.
Pressing moves the cursor to the Site Security option list.
To scroll the option list to [Site Security: On] by pressing . Once you turn on
Site Security, you must enter the correct code to turn it off.
To activate Site Security press .
2.1.5 HOW TO DELETE A SITE SETUP
If you attempt to save a Site Setup when memory is full, the screen will show [Memory Full].
If you get this message after issuing a Save/Rename Site command, you’ll have to delete an
unneeded Site Setup to clear memory space. The Datalogger and Site Storage share a common
memory pool, so a large amount of logged data could also trigger the [Memory Full] message.
For how to clear Datalogger memory, see [Meter Facilities/Datalogger Control]. The Defrag-
ment Command may also secure more memory (see Meter Facilities/Memory Control Menu).
To delete a stored Site Setup:
To highlight [Delete Site] press .
To access the [Delete Site] option list press .
Move the cursor to the site name of the site setup you want to delete.
To delete the obsolete site setup press .
2.1.6 HOW TO SAVE/RENAME A SITE SETUP
The Save/Rename Site command copies data from Active Memory to the Site Storage Memory.
Saved Site Setups can be recalled for future use. This menu cell allows you to save a Site Setup
at any time during the programming process. However, you must recall and complete the Site
Setup in order to achieve operation.
When you access the Save/Rename Site menu cell, the name of the most recently created Site
Setup (see Create/Name Site) appears automatically. If this name is acceptable, you can press
<ENT> to save the Site Setup. You can change the listed site name by following the procedure
ENT
ENT
ENT
ENT
ENT