101
4.4.4.2 Running Record
This log can store up to 100 running history messages. This includes
normal operating events such as the inverter turning on, going into
standby and turning off.
4.4.4.3 Fault Record
This log can store up to 100 fault codes.
4.4.5 Device Information
Press the ESC key to leave the main “operation interface” and press
ENT to access the “Main Menu.” Using the arrow keys, scroll down to
the submenu Device Information and press ENT to check the device
information, as shown in Figure 4-24.
Inverter information
P1/2
Device Model: SCA60KTL-DO/US-
480
Device SN: 0 0000 0000 0000
DSP Ver: 01.00 0x505A
LCD Ver: 01.00
DSP Bootloader Ver: 01.00
LCD Bootloader Ver: 01.00
MiniMCU Ver: 01.00
Data Logger Information
P2/2
IP 0.0.0.0
Data Logger SN 0 0000 0000 0000
Subnet Mask 0.0.0.0
DNS Server 0.0.0.0
Gateway 0.0.0.0
Address Range
Main Menu
Measurement Data
History Record
Power On/Off
Device Information
Setting
Figure 4-24 Device Information
This menu provides the information to identify the version of boards in
the inverter, model number, serial number and data logger information.
This information may be required when contacting CPS service.
To Next Page
Loading...
