HIGH VOLTAGE:
This inverter operates with high voltages. All work on the inverter
must only be performed as described in this document.
HOT SURFACE:
The inverter is designed to meet international safety standards, but
surfaces can become hot during operation. Do not touch the heat
sink or peripheral surfaces during or shortly after operation.
EARTH GROUND:
This symbol marks the location of the grounding terminal, which
must be securely connected to Ground through the AC EGC
(Equipment Grounding Conductor) to ensure operational safety.
WARNING:
All the installation and wiring connections must be performed by
qualified technical personnel. Disconnect the inverter from the PV
modules and the AC grid before maintaining or servicing the
equipment.
Risk of electric shock and fire. Use only with PV modules that have
a maximum system voltage of rating of 1000V
DC
or higher.
Electric shock Hazard. The DC conductors of this photovoltaic
system are normally ungrounded but will become intermittently
grounded without indication when the inverter performs the PV array
isolation measurement.
Shock Hazard. The inverter is energized from both AC and DC
sources. Disconnect all energy sources before servicing.
For continued protection against risk of fire, replace only with same
type and ratings of fuse.
To Next Page
Loading...
