CPS SCA50KTL-DO/US-480 - Setting the Time; Time Setting; Independent Mode Setting

105
6. Setting the Time. From the previous menu, press ESC to return to the
System Parameters menu. Select Time and press ENT. Scroll up/down
to select the numerical value, then press ENT to go to next option. e.g.:
Year to Month. Finally Press the ENT key to confirm the setting.
Time setting
2016–05 - 21 Date：
Time： 12 ：21 ：03
Figure 5-4 Time Setting
7. Choose PV Input working mode. The factory default working mode of the
DC input connection and MPP Tracker is set for Independent. Contact
CPS if parallel mode is required.
PV Input Mode
Independent
Figure 5-5 Independent mode setting