CPS SCA50KTL-DO/US-480 - Page 114

108
12. If the inverter fails to operate normally, the “FAULT” light will
illuminate and the fault menu will be displayed. Select Current Error
and press ENT to access the current faults the inverter has recorded.
This information will show on the LCD screen as shown in the Figure
5-9.
Current Error
P1/1
Date Error
2015/10/22 12:20:08 ArcboardErr
2015/10/22 12:20:08
2015/10/22 12:20:08 Fault0040
2015/10/22 12:20:08
2015/10/22 12:20:08
Time
Fault0040
Fault0040
Fault0040
Figure 5-9 Fault Information Interface