Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 155
2. Tap Update Now to initiate the firmware update for STEP 1.
Devices are grouped and updated based on the device type in the order listed on the
screen: ZUMLINK-JBOX load controllers, ZUMLINK-KP keypad, ZUMNET-JBOX load
controllers, and ZUMLINK presence detectors.
NOTE:After a device type is updated, the Zūm space disconnects from the bridge and
redirects the Zūm app back to Nearby Rooms. Refer to steps 2 through 5.
NOTE: The number next to the device type indicates the number of devices of that
type that need to be updated in that Zūm space.
To Next Page
Loading...
