Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 21
Easy Installation
For flexibility and ease-of-use, install Zūm devices (load controllers, keypads, and presence
detectors, refer to Overview on page 8) and connect them with Zūm Link
(CBL-CAT5E-ZUMLINK-P) or Zūm Net (CBL-CAT5E-ZUMNET-P) CAT5e cable (refer to Cables
on page 14). Nonsystem presence detectors may also be installed to any load controller with
analog inputs.
For flexibility and ease-of-use, Zūm wired keypads are preprogrammed so the keypad can be
installed in a room along with Zūm load controllers, occupancy or vacancy sensors, and a daylight
sensor, and then used to control the lights in the room without programming. Room setup can be
accomplished quickly through the Zūm app. A finished installation requires a decorator-style
faceplate (FP-G Series, sold separately).
Override Contact Closure Input
An integrated contact closure provides the means to place all connected Zūm Net and Zūm Link
devices into Emergency Override mode.
ZUMLINK-JBOX-16A-LV
l
Zūm® wired junction box mounted lighting load dimmer
l
Dimming control of 0-10V LED drivers or 4-wire fluorescent ballasts
l
Integration with Zūm keypads, presence detectors, and daylight sensors (sold separately)
l
Supports in-room device daisy chaining
Zūm Link Wired Technology
Zūm Link technology enables in-room lighting control through keypads and sensors wired to
controllers. Zūm Wired devices connect via CBL-CAT5E-ZUMLINK-P CAT5e cable (sold
separately, refer to Cables on page 14) to RJ-45 ports provide simple daisy-chaining and lighting
control of compatible loads. The Zūm Wired devices work together in a local ecosystem to
provide customized solutions using the Zūm app.
To Next Page
Loading...
