22 • Crestron Zūm® Wired Solutions Product Manual — Doc. 9349B
Energy Management and Efficiency
The load controllers are capable of energy monitoring through custom programming. Occupancy
sensor, vacancy sensor, and daylight sensor connectivity enables significant energy savings. To
reduce energy usage, lights turn off automatically when the room is vacant and dim gradually
depending on the amount of natural daylight in the room.
Easy Installation
For flexibility and ease-of-use, install Zūm devices (load controllers, keypads, and presence
detectors, refer to Overview on page 8) and connect them with Zūm Link
(CBL-CAT5E-ZUMLINK-P) or Zūm Net (CBL-CAT5E-ZUMNET-P) CAT5e cable (refer to Cables
on page 14). Nonsystem presence detectors may also be installed to any load controller with
analog inputs.
For flexibility and ease-of-use, Zūm wired keypads are preprogrammed so the keypad can be
installed in a room along with Zūm load controllers, occupancy or vacancy sensors, and a daylight
sensor, and then used to control the lights in the room without programming. Room setup can be
accomplished quickly through the Zūm app. A finished installation requires a decorator-style
faceplate (FP-G Series, sold separately).
Override Contact Closure Input
An integrated contact closure provides the means to place all connected Zūm Net and Zūm Link
devices into Emergency Override mode.
ZUMLINK-JBOX-20A-PLUG
l
Zūm® wired junction box mounted lighting load plug load controller
l
Integration with Zūm keypads, presence detectors, and daylight sensors (sold separately)
l
Zero-cross switching with the ability to switch control of 20A plug loads
l
Supports in-room device daisy chaining
To Next Page
Loading...
