Product Manual — Doc. 9349B Crestron Zūm® Wired Solutions • 213
6. Configuration Data:
l
Save room configuration: Save the room configuration data in the space.
l
Share room configuration: Share the room configuration data in the space.
l
Send configuration to room: Send room logic changes made in the app to the room.
l
Advanced data management: Review the Map, Logic, and Settings of the data
currently loaded. Load, save or share new Map, Logic, or Settings data.
NOTE: Changes made in the app are not sent to the room until they are
deployed using the Send configuration to room button.
7. Revert changes: Restore all non-deployed changes made since launching the app.
Sensor Test Mode
Use Sensor Test Mode to view a presence detector's status, and easily edit a presence detector's
settings after they are installed. To access the Sensor Test Mode from the Zūm app Main Screen,
tap Configuration and tap Occupancy Sensors. A list of occupancy sensor components displays,
including the occupancy sensor components for load controllers and presence detectors.
To Next Page
Loading...
