Crestron Zum - Page 240

240 • Crestron Zūm® Wired Solutions Product Manual — Doc. 9349B
Occupancy Sensor
To enable or temporarily disable occupancy sensing:
1. Click the toggle to enable or temporarily disable occupancy sensing.
When disabling occupancy sensing, set the amount of time the occupancy sensor is
disabled. The sensor may be disabled for up to 1,415 minutes or appropriately 23 hours.
2. Click Send to send changes to the room, or close the Control Room to discard unsaved
changes.
Bluetooth PIN
Set the Bluetooth PINfor Bluetooth devices in a room.
1. Set the PIN (0 to 9999)
2. Click Send to send changes to the room, or close the Control Room to discard unsaved
changes.
Refer to Set the Bluetooth PIN on page 229 for more information.
Demand Response Level
Set the Demand Response Level for devices in a room.
1. Set the level (0 to 100).
2. Click Send to send changes to the room, or close the Control Room to discard unsaved
changes.
Refer to Configure the Demand Response Mode and Level on page 232 for more information.