Culligan CTM Series User Manual

Installing Accessories 41
Cat. No. 01029401
Non-Hardwater Bypass Conversion
NOTE The Non-Hardwater Bypass is installed at the factory for the Multi-Tank valves and systems.
Figure 53.
1. Remove the tubing from the
manifold
2. Unscrew the manifold from
the valve body (16 #3
screws).
3. Use a flat head screwdriver to
pry the manifold off the valve
body.

Culligan CTM Series Specifications

General

Power Source	Electric
Voltage	120V
Type	Countertop
Dispensing Options	Cold
Filter Life	6 months