Culligan CTM Series - Installation; Installation Materials and Sizing Kit

Installation 5
Cat. No. 01029401
Installation
Materials
The following are necessary components for installing a CTM Softener:
*Not included with Timeclock models
Sizing Kit
Figure 2. Materials
Media
(Separate
Packaging,
See Table
3 on page
7)
Media Tank
(Boxed
Separately)
Vacuum
Breaker*
GBE Controller
(Boxed Separately)
Plumbing Adapter
(Sold Separately)
Flow
Meter*
(Comes
with Valve)
Eductor Throat(s)
Drain Adapter
Drain Line
Flow Control
Eductor Nozzle(s)
Brine Refill
Flow Control
Insert(s)
Brine Tank (Sold Separately
1/2 Brine Tubing (Not Provided)
Distributor (Boxed
Separately)
Lubricant (Dow
Corning 111/Molykote
111, Not Provided)
Pressure Relief*
GBE Front
Mounting Kit
Pilot Valve
Strainer