Operation Log 95
Cat. No. 01029401
Operation Log
Use the log provided to maintain a record of the system operation. This can be very helpful in identifying any operation
problems or maintenance requirements. Most of this information can be found by going to Diagnostics > Advanced Stats
on the GBE Controller. Refer to GBE Programming for Commercial Softeners and Filters (except for HFxN) Manual (P/N
01027295) for more information. This manual can be obtained from your local dealer, CPort (www.cport.culligan.com)
under the Technical Service Tab or on the Service Tech App.
Date Soft Water
Test Results
Unit ID
(If Multiple)
Totalized
Flow
Current
Flowrate
Total
Regens
Date of
Last Regen
Regen
Trigger
To Next Page
Loading...
Need help?
General
