Curtiss-Wright Parvus SWI-22-10-10 - OptShow; OptDefaults

Appendix B Parvus CLI Enhancements
Parvus SWI-22-10
Curtiss-Wright
Page 102 of 107
MNL-0641-01 Rev A3
ECO-4823
Effective: 04 Oct 16
OptShow
Displays the current values of all Parvus persistent options.
Syntax
Debug Parvus OptShow
Example
SWI2210-XXXX:/Debug/Parvus>optshow
Parvus options:
Fault log wrapping: enabled
Watchdog enabled: enabled
Zeroize enabled: disabled
Zeroize polarity: +12 VDC
Zeroize style: 0 - Clear configuration.
Zeroize debounce time: 20 (2.0 S)
CBIT test interval: 600 (60.0 S)
Temp monitor display: disabled
Temperature thresholds:
Sensor warn critical
------ ---- --------
local 100 115
switch 100 115
phy1 100 115
phy2 100 115
SWI2210-XXXX:/Debug/Parvus>
OptDefaults
Resets all Parvus persistent options to default values.
Syntax
Debug Parvus OptDefaults
Example
SWI2210-XXXX:/Debug/Parvus>optdefaults