CHAPTER 4 MANAGEMENT INTERFACE DESCRIPTION
The SWI-22-10 management interfaces provide the network administrator with a set of comprehensive
management functions. The network administrator has a choice of two easy-to-use management
interfaces:
Serial CLI (command line interface)
Manages all switch features.
Must be used to change the switch IP address from the factory default.
Can be used even if there is no network connectivity.
Provides brief help on syntax for each command.
Web GUI (graphical user interface).
Manages all switch features except the switch IP address.
Requires network connectivity.
Provides extensive help on functions and parameters.
For centrally managed networks, the switch also supports SNMP Management (not described in this
manual).
This chapter explains the switch configuration files that store switch parameters, and then provides step-
by-step instructions on how to use each of these interfaces to configure and manage the switch. The CLI
is described in detail in Appendix A.
To Next Page
Loading...
