Changing the Admin Password (Example)
By default, there is no admin password. To set a password:
1. Use the navigation pane to find and display the appropriate page.
The Users Configuration page lists the configured users. You can also use this page to add
users.
Each user name is underlined, indicating it is a link to a detail page.
2. Display help if you're unsure what a field means.
3. Click the admin user name. The Edit User popup is displayed
4. Type the new password twice.
5. Click the Save button. The change goes into effect immediately.
6. When you're finished making all changes, save the changes to startup-config, following the
instructions in the next section. If you do not copy the changes to startup-config, they will be lost
when power is turned off.
To Next Page
Loading...
