WEB GUI INTRODUCTION
This section explains how to access the web GUI, describes page navigation, and explains how to access
help.
Accessing the Web Interface
Once the IP address of the switch is set up, you can use the Web GUI to manage the switch.
where the IP address of the switch is .
1. Connect the switch to a host computer via an Ethernet port. The computer must exist on the same
subnet as the switch IP address.
2. Type the switch URL (IP address) into the address bar of a web browser on the host computer; for
example: http://10.33.15.2
3. The Password popup is displayed. Type admin in the User name box.
4. If you've already set an admin password, type it in the password box. Otherwise leave the box
empty—there is no default password--and click OK.
To Next Page
Loading...
