DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
317
30-2 change drive
Description
This command is used to change the current drive.
Format
change drive <drive_id>
Parameters
<drive_id> - Specifies the drive ID. The format of drive_id is C:/, D:/ etc.
Restrictions
None.
Example
To display the storage media’s information:
DWS-3160-24PC:admin# change drive c:/
Command: change drive c:/
Success.
DWS-3160-24PC:admin#
30-3 md
Description
This command is used to create a directory.
Format
md <pathname 64>
Parameters
<pathname 64> - Specifies the directory to be removed. The path name can be specified either
as a full path name or partial name. For partial path name, it indicates the file is in the current
directory. The drive ID also included in this parameter, for example: d:/config/bootup.cfg. This
name can be up to 64 characters long.
Restrictions
Only Administrators and Operators can issue this command.
To Next Page
Loading...
