D-Link DWS-3160-24TC - Disable Pvid Auto Assign

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
34
Format
enable pvid auto_assign
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the auto-assign PVID:
DWS-3160-24PC:admin# enable pvid auto_assign
Command: enable pvid auto_assign
Success.
DWS-3160-24PC:admin#
3-13 disable pvid auto assign
Description
This command is used to disable auto-assignment of the PVID.
Format
disable pvid auto_assign
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the auto-assign PVID:
DWS-3160-24PC:admin# disable pvid auto_assign
Command: disable pvid auto_assign
Success.
DWS-3160-24PC:admin#