D-Link DWS-3160-24TC - Show Poe Ports

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
533
Format
show poe system
Parameters
None.
Restrictions
None.
Example
To display the PoE system:
DWS-3160-24PC:admin#show poe system
Command: show poe system
PoE System Information
---------------------------------------------------
Power Limit : 250(Watts)
Power Consumption : 0(Watts)
Power Remained : 250(Watts)
Power Disconnection Method : Deny Low Priority Port
Detection Legacy PD : Disabled
If Power Disconnection Method is set to deny next port, then the system can not
utilize out of its maximum power capacity. The maximum unused watt is 19W.
DWS-3160-24PC:admin#
55-4 show poe ports
Description
This command is used to display the configuration and actual values of the PoE port(s).
Format
show poe ports {<portlist>}
Parameters
<portlist> - (Optional) Specified a list of ports to be displayed.
If no parameter specified, the system will display the status for all ports.
Restrictions
None.