D-Link DWS-3160-24TC - Enable Web; Disable Web

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
140
DWS-3160-24PC:admin# disable telnet
Command: disable telnet
Success.
DWS-3160-24PC:admin#
12-8 enable web
Description
This command is used to enable the Switch’s HTTP based management software.
Format
enable web {<tcp_port_number 1-65535>}
Parameters
<tcp_port_number 1-65535> - (Optional) The TCP port number. TCP ports are numbered
between 1 and 65535. The “well-known” TCP port for the WEB protocol is 80.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable HTTP and configure port number:
DWS-3160-24PC:admin# enable web 80
Command: enable web 80
Success.
DWS-3160-24PC:admin#
12-9 disable web
Description
This command is used to disable the Switch’s HTTP based management software.
Format
disable web
Parameters
None.