D-Link DWS-3160-24TC - Show Ssh Authmode; Config Ssh User

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
577
Example
To configure user authentication method:
DWS-3160-24PC:admin# config ssh authmode publickey enable
Command: config ssh authmode publickey enable
Success.
DWS-3160-24PC:admin#
62-4 show ssh authmode
Description
This command is used to display the user authentication method.
Format
show ssh authmode
Parameters
None.
Restrictions
None.
Example
To display user authentication method:
DWS-3160-24PC:admin#show ssh authmode
Command: show ssh authmode
The SSH Authentication Method:
Password : Enabled
Public Key : Enabled
Host-based : Enabled
DWS-3160-24PC:admin#
62-5 config ssh user
Description
This command is used to configure user information for SSH.
Format
config ssh user <username 15> authmode [hostbased [hostname <domain_name 32> |
hostname_IP <domain_name 32> [<ipaddr> | <ipv6addr>]] | password | publickey]