DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
54
DWS-3160-24PC:admin# config 802.1x guest_vlan ports 1-8 state enable
Command: config 802.1x guest_vlan ports 1-8 state enable
Warning! GVRP of the ports were disabled!
Success.
DWS-3160-24PC:admin#
4-20 show 802.1x guest_vlan
Description
This command is used to display the information of guest VLANs.
Format
show 802.1x guest_vlan
Parameters
None.
Restrictions
None.
Example
To display the information of a guest VLAN:
DWS-3160-24PC:admin#show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Setting
-----------------------------------------------------------
Guest VLAN : guestVLAN
Enabled Guest VLAN Ports : 1-8
DWS-3160-24PC:admin#
4-21 config radius add
Description
This command is used to add a new RADIUS server. The RADIUS server with a lower index value
will have a higher authenticate priority.
To Next Page
Loading...
