D-Link DWS-3160-24TC - Show Rspan

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
570
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure an RSPAN source entry without source target port:
DWS-3160-24PC:admin#config rspan vlan vlan_name v2 source add ports 2-5 rx
Command: config rspan vlan vlan_name v2 source add ports 2-5 rx
Success.
DWS-3160-24PC:admin#
To configure an RSPAN source entry for per flow RSPAN, without any source ports:
DWS-3160-24PC:admin#config rspan vlan vlan_id 2 source
Command: config rspan vlan vlan_id 2 source
Success.
DWS-3160-24PC:admin#
To add redirect ports for special RSPAN VLAN on intermediate or destination Switch:
DWS-3160-24PC:admin#config rspan vlan vlan_name v2 redirect add ports 18-19
Command: config rspan vlan vlan_name v2 redirect add ports 18-19
Success.
DWS-3160-24PC:admin#config rspan vlan vlan_id 2 redirect add ports 18-19
Command: config rspan vlan vlan_id 2 redirect add ports 18-19
Success.
DWS-3160-24PC:admin#
60-6 show rspan
Description
This command is used to display the RSPAN configuration.
Format
show rspan {[vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]}
Parameters
vlan_name - (Optional) Specifies the RSPAN VLAN by VLAN name