D-Link DWS-3160-24TC - Show Command Logging

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
195
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable the command logging:
DWS-3160-24PC:admin# disable command logging
Command: disable command logging
Success.
DWS-3160-24PC:admin#
16-3 show command logging
Description
This command is used to display the Switch’s general command logging configuration status.
Format
show command logging
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To display the command logging configuration status:
DWS-3160-24PC:admin#show command logging
Command: show command logging
Command Logging State: Enabled
DWS-3160-24PC:admin#