D-Link DWS-3160-24TC - Enable Snmp; Disable Snmp

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
619
DWS-3160-24PC:admin#show snmp engineID
Command: show snmp engineID
SNMP Engine ID : 1023457890
DWS-3160-24PC:admin#
66-19 enable snmp
Description
This command is used to enable the SNMP function.
Format
enable snmp
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable SNMP:
DWS-3160-24PC:admin# enable snmp
Command: enable snmp
Success.
DWS-3160-24PC:admin#
66-20 disable snmp
Description
This command is used to disable the SNMP function.
Format
disable snmp
Parameters
None.