D-Link DWS-3160-24TC - Show Error Ports

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
504
DWS-3160-24PC:admin#show packet ports 23
Command: show packet ports 23
Port Number : 23
==================================================================
Frame Size/Type Frame Counts Frames/sec
--------------- ---------------------- -----------
64 626 0
65-127 360 0
128-255 116 0
256-511 189 0
512-1023 40 0
1024-1518 55 0
Unicast RX 603 0
Multicast RX 37 0
Broadcast RX 40 0
Frame Type Total Total/sec
--------------- ---------------------- -----------
RX Bytes 92853 0
RX Frames 680 0
TX Bytes 682310 0
TX Frames 1042 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
50-2 show error ports
Description
This command is used to display error statistics for a range of ports.
Format
show errors ports <portlist>
Parameters
<portlist> - Specifies a range of ports to be displayed.
Restrictions
None.
Example
To display the errors of the port 23