D-Link DWS-3160-24TC - Enable Syslog

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
645
DWS-3160-24PC:admin#show log index 1-3
Command: show log index 1-3
Index Date Time Level Log Text
----- ---------- -------- ------- ---------------------------------------------
-
3 2000-01-29 03:42:35 CRIT(2) System started up
2 2000-01-29 03:42:35 CRIT(2) System cold start
1 2000-01-29 03:41:43 INFO(6) Port 2 link down
DWS-3160-24PC:admin#
69-3 show log_software_module
Description
This command is used to display the protocols or applications that support the enhanced log. The
enhanced log adds the module name and module ID. Network administrators can display logs by
module name or module ID.
Format
show log_software_module
Parameters
None.
Restrictions
None.
Example
To display the protocols or applications that support the enhanced log:
DWS-3160-24PC:admin#show log_software_module
Command: show log_software_module
CFM_EXT CP ERPS ERROR_LOG
MSTP VRRP WLAN
DWS-3160-24PC:admin#
69-4 enable syslog
Description
This command is used to enable the sending of syslog messages.