D-Link DWS-3160-24TC - Show Accounting Service

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
64
Example
Enable it to configure accounting shell state:
DWS-3160-24PC:admin# config accounting service shell state enable
Command: config accounting service shell state enable
Success.
DWS-3160-24PC:admin#
4-31 show accounting service
Description
This command is used to display the status of RADIUS accounting services.
Format
show accounting service
Parameters
None.
Restrictions
None.
Example
To display information of RADIUS accounting services:
DWS-3160-24PC:admin#show accounting service
Command: show accounting service
Accounting State
-------------------
Network : Disabled
Shell : Enabled
System : Disabled
DWS-3160-24PC:admin#