D-Link DWS-3160-24TC - Chapter 52 Peripherals Command List

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
517
Chapter 52 Peripherals Command List
show device_status
show environment
config temperature threshold {high <temperature -500-500> | low <temperature -500-500>}
config temperature [trap | log] state [enable | disable]
52-1 show device_status
Description
This command is used to display current status of power(s) and fan(s) on the Switch.
Format
show device_status
Parameters
None.
Restrictions
None.
Example
To display the device status:
DWS-3160-24PC:admin#show device_status
Command: show device_status
Internal Power: Active
External Power: Fail
Right Fan : OK
DWS-3160-24PC:admin#
52-2 show environment
Description
This command is used to display current status of power(s) and fan(s) on the system.
Format
show environment