D-Link DWS-3160-24TC - Disable Loopdetect

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
415
Format
enable loopdetect
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the LBD function globally:
DWS-3160-24PC:admin# enable loopdetect
Command: enable loopdetect
Success.
DWS-3160-24PC:admin#
40-4 disable loopdetect
Description
This command is used to disable the LBD function globally on the Switch.
Format
disable loopdetect
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the LBD function globally: