D-Link DWS-3160-24TC User Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
892
95-31 show wireless
Description
This command is used to display the configured wireless Switch’s global parameters and the
operational status.
Format
show wireless
Parameters
None.
Restrictions
None.
Example
To display the wireless Switch’s global parameters:
NOTE: The Switch will take several minutes to elect the Cluster Controller.

D-Link DWS-3160-24TC Specifications

General

MAC address table	16000 entries
Jumbo frames support	Yes
Packet buffer memory	2 MB
Number of static routes	512
Maximum data transfer rate	1 Gbit/s
10G support	No
Number of VLANs	3965
Networking standards	IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3x
Security algorithms	128-bit WEP, 152-bit WEP, 64-bit WEP, WPA, WPA2
Switch type	Managed
Switch layer	L2+
PCI-X slots	0
Console port	RJ-45
SFP/SFP+ slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	20
Switching protocols	IPv6
Noise level	46.3 dB
Mean time between failures (MTBF)	561829 h
Power consumption (typical)	37.7 W
Safety	UL/cUL, CB
Stackable	-
Form factor	1U
Electromagnetic compatibility	FCC A, CE, ICES-003, C-Tick, VCCI
Heat dissipation	128.6 BTU/h
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	210 mm
Width	440 mm
Height	44 mm
Weight	2550 g