D-Link DWS-3160-24TC - Show Sntp; Enable Sntp

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
663
DWS-3160-24PC:admin# config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-
interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DWS-3160-24PC:admin#
73-2 show sntp
Description
This command is used to display the SNTP current time source and configuration.
Format
show sntp
Parameters
None.
Restrictions
None.
Example
To display SNTP:
DWS-3160-24PC:admin#show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 30 sec
DWS-3160-24PC:admin#
73-3 enable sntp
Description
This command is used to enable the SNMP feature.
Format
enable sntp