DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
620
Restrictions
Only Administrators and Operators can issue this command.
Example
To disable SNMP:
DWS-3160-24PC:admin# disable snmp
Command: disable snmp
Success.
66-21 config snmp system_name
Description
This command is used to configure the name for the Switch.
Format
config snmp system_name {<sw_name>}
Parameters
system_name - A maximum of 128 characters is allowed. And NULL string is accepted.
<sw_name> - (Optional) Enter the system name used here.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the Switch name for “Technical”:
DWS-3160-24PC:admin#config snmp system_name Technical
Command: config snmp system_name Technical
Success.
DWS-3160-24PC:admin#
66-22 config snmp system_location
Description
This command is used to enter a description of the location of the Switch.
To Next Page
Loading...
