D-Link DWS-3160-24TC - Page 625

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
621
Format
config snmp system_location {<sw_location>}
Parameters
system_location - A maximum of 128 characters is allowed. And NULL string is accepted
<sw_location> - (Optional) Enter the system location string here.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the Switch location for “HQ 5F”:
DWS-3160-24PC:admin# config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DWS-3160-24PC:admin#
66-23 config snmp system_contact
Description
This command is used to enter the name of a contact person who is responsible for the Switch.
Format
config snmp system_contact {<sw_contact>}
Parameters
system_contact - A maximum of 128 characters is allowed. And NULL string is accepted.
<sw_contact> - (Optional) Enter the system contact string here.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the Switch contact to “MIS Department II”:
DWS-3160-24PC:admin# config snmp system_contact "MIS Department II"
Command: config snmp system_contact "MIS Department II"
Success.
DWS-3160-24PC:admin#