Local Configurations 104
Enter a description of the user.
Enter user MAC address that is allowed to login the Device.
Select a group for the user.
Select the authorities to the user of a group.
The authority for admin account cannot be changed.
To management account easily, when defining the user account
authority, it is recommended not to give the authority to the common
user account lower than the advanced user account Authority.
Click Save. Step 4
The message pops up. Click OK.
4.3.6.2 Modifying a User
You can modify the user account information such as memo, MAC address, group, and
authority. For admin account, you can configure the reserved email address and unlock pattern.
Select Main Menu > ADVANCED > ACCOUNT. Step 1
The ACCOUNT interface is displayed.
Select a user, and then click Modify User. Step 2
The Modify User interface is displayed. See Figure 4-86.
Modify user Figure 4-86
Modify the user information if needed. For details, see Table 4-37. Step 3
Deleting the admin account is not supported.
Click Delete to delete the added user account.
Click Save. Step 4
The message pops up. Click OK.
To Next Page
Loading...
Need help?
General