Web Operations 150
The PTZ camera repeats movement according to the configured patterns. The
operation records include the information such as the manual operations and
focus adjustment.
1. In the PTZ Setup list, select Pattern, and then enter the value in the
Pattern box.
2. Click Add.
The Start Rec and Stop Rec buttons are displayed.
3. Click Start Rec. Then operate the PTZ control panel to adjust the camera
with regard to the parameters such as monitoring direction, zoom, and
focus.
4. Click Stop Rec to complete the settings.
5. Enter the pattern value, and then click Start. The camera moves according
to the configured patterns. Click Stop to stop the pattern.
In the PTZ Setup list, select Pan, and then click Start. The camera keeps
rotating with 360° horizontally. Click Stop to stop rotating.
In the PTZ Setup list, select AUX, enter the value, and then click Aux On.
Click Aux Off to close the auxiliary function.
Controls the light of external device through RS-485 command. To use this
function, make sure it is supported on the external device.
In the PTZ Setup list, select Light. Click On to turn on the light, and click Off to
turn off the light.
Controls the screen wiper of external device through RS-485 command. To use
this function, make sure it is supported on the external device.
In the PTZ Setup list, select Screen Wiper. Click On to turn on the screen
wiper, and click Off to turn off the screen wiper.
Controls the warming-up module of external device through RS-485 command.
To use this function, make sure it is supported on the external device.
In the PTZ Setup list, select Clear fog. Click On to turn on the warming-up
module, and click Off to turn off the warming-up module.
5.2.1.4.3 Using PTZ OSD Menu
After the PTZ OSD menu is turned on, it displays on the monitoring window. You can configure
the settings for the options such as camera, PTZ, and system, and apply the settings through
arrow buttons and Save button.
This function is supported only on the camera with PTZ OSD menu function.
Turn on the camera monitoring screen. Step 1
On the PTZ control panel, click the PTZ Menu tab. Step 2
The PTZ Menu is displayed, see Figure 5-31. For details, see Table 5-11.
To Next Page
Loading...
