Web Operations 151
PTZ OSD menu Figure 5-31
Table 5-11 PTZ menu parameters description
Up and down buttons: Select the item that is pointed.
Left and right buttons: When the item is pointed, perform configurations to
the item.
Click On to turn on the OSD menu that is displayed on the monitoring
window.
Click Off to turn off the PTZ OSD menu.
If these is sub-menu for an item, click Save to enter the sub-menu.
More the pointer to Return, and then click Save to return to the higher
level menu.
More the pointer to Exit, and then click Save to exit the OSD menu.
Click On. Step 3
The OSD menu is displayed on the monitoring screen.
Table 5-12 OSD menu parameters description
Move the pointer to Camera, and then click Save to enter the sub-menu of
Camera.
You can configure the camera parameters such as image, exposure, backlight,
white balance, day & night, zoom, and focus.
Move the pointer to PTZ, and then click Save to enter the sub-menu of PTZ.
You can configure the PTZ parameters such as preset, tour, border, pattern,
pan, and reboot.
Move the pointer to System, and then click Save to enter the sub-menu of
System.
You can configure the settings such setting analog PTZ, restoring factory
default, and viewing camera version and PTZ version.
More the pointer to Return, and then click Save to return to the higher level
menu.
More the pointer to Exit, and then click Save to exit the OSD menu.
Click Off to turn off the PTZ OSD menu. Step 4
To Next Page
Loading...
