Web Operations 152
5.2.1.5 Image and Alarm out Settings
For each channel, you can configure the image settings such as adjusting brightness and
contrast, and enable or disable the alarm out.
5.2.1.5.1 Configuring Image Settings
You can adjust the video image color effect such as brightness, contrast, saturation, and hue by
right-clicking on the channel.
Click on a live view channel window to select it. Step 1
Click the Image Setup tab. Step 2
The Image Setup interface is displayed. See Figure 5-32.
Image setup Figure 5-32
Configure the parameters. For details, see Table 5-13. Step 3
Table 5-13 Image setting parameters description
Adjusts the image brightness. The bigger the value is, the brighter the
image will become.
Adjusts the image contrast. The bigger the value is, the more obvious the
contrast between the light area and dark area will become.
Adjusts the color darkness. Adjust the saturation according to the actual
situation. The bigger the value, the lighter the color will become.
Adjusts the image brightness. Adjust the saturation according to the actual
situation. The bigger the value is, the brighter the image will become.
Click Reset to clear the existing image settings.
5.2.1.5.2 Configuring Alarm Output Settings
Turn on or off the alarm signal of corresponding channel.
Click on a live view channel window to select it. Step 1
Click the Alarm Out tab. Step 2
The Alarm Out interface is displayed. See Figure 5-33.
Alarm Output Figure 5-33
To Next Page
Loading...
